What is sensitivity?

Sensitivity reflects the imager's response to gas concentration changes, fundamentally depending on the IR detector and optical lens. High-end imagers use high-resolution cooled IR detectors that capture tiny radiation differences between gas and background; NETD can be as low as 10 mK, identifying trace seepage on pipes and tank surfaces.

What is the detection limit?

The detection limit (Limit of Detection, LOD) is the lowest gas concentration the device can stably identify. For OGI devices, the common metric is NECL (Noise Equivalent Concentration Length), in ppm·m. A quality cooled gas-detection core can reach NECL as low as 12 ppm·m, meaning it can identify a gas column concentration of about 12 ppm over a 1 m path.

Factors affecting sensitivity and detection limit

  • Optical design:Center wavelength and bandwidth of the narrow-band filter must precisely match the target gas absorption peak
  • Detector performance:Lower cooling temperature and smaller NETD enable weaker signals to be captured
  • Background temperature difference:Greater temperature/emissivity difference between gas and background makes the cloud more visible
  • Algorithm compensation:Dynamic temperature, humidity and atmospheric-transmittance compensation improve stability in complex environments
  • Lens focal length:Long focal lengths improve spatial resolution but narrow the field of view

Sensitivity and detection limit are not isolated metrics, but the product of deep integration across optical design, algorithm optimization and environmental adaptation.